Sentence examples for using an initial temperature from inspiring English sources

Our results agree qualitatively with those obtained by Correa and Dean[18] for the auto-ignition of lean n-heptane/air mixtures using an initial temperature of 1,000 K.

The PCR protocol was to use an initial temperature of 94°C for 1 min, followed by 35 cycles of 94°C for 30 s, 55°C for 30s, 72°C for 30 s, and 72°C for 7 min. Then 1 μL of DNA from the first round of PCR was used as the template in the second round of PCR with the inner primers (EV2F: 5′-CCCCTGAATGCGGCTAAT-3′, EV2R: 5′-ATTGTCACCATAAGCAGCCA-3′) under the same reaction system and cycling conditions.

As observed earlier with large-volume injection of ethyl acetate, the vent time (here set at 40 s using an initial PTV temperature of 50°C) was not at all critical, even for the most volatile pesticide (dichlorvos).

For analysis of PCBs, we used an HT-8 PCB column (60 m × 0.25 mm i.d.; SGE Analytical), which was used with an initial temperature of 150°C (0 min), increased 20°C/min to 200°C (0 min), 5°C/min to 260°C (0 min), and 10°C/min to 300°C (11.5 min).

In quasi-static tests, specimens (n = 5) of all formulations were tested until failure at room temperature using an initial applied load of 1 mN and loading rate of 100 mN min−1 [26].

The optimum temperature was determined using an initial pH of 5.5.

Simulated Annealing (SA) with α = 0.1 and an initial temperature of T = 5 using a linear annealing schedule and a population size of 250.

One μl of the samples was injected for a splitless run with an initial temperature of 70°C (5 min) and a maximum oven temperature of 330°C (equilibration time of 0.25 min) was used.

It is not necessary to assume an initial temperature profile.

We start with an initial temperature distribution u x,0) = f(x) such as the one represented by the following graph (with L = 2 meters). is used to model one-dimensional temperature evolution.

Imagine a thin rod that is given an initial temperature distribution, then insulated on the sides.