Exact(5)
Assuming fractional melting50, the rate of CO2 mobilization into the melt phase in each model calculation was calculated using an initial concentration of 140 p.p.m.w CO2 (ref. 19) and a partition coefficient of DCO2=0.01.
Based on the results shown above, further experiments were executed using an initial concentration of glycerol of 20 g/L.
We repeated the titration using an initial concentration of PLCβ1 that is above the Kd, 10 nM, to verify that the association was shifted to the stoichiometric regime, and a midpoint of 10 nM was obtained (data not shown).
The crude filtrates were obtained from 10-day cultures using an initial concentration of diuron of 7 μg/mL.
We found, using an initial concentration of 100 pg/μL of DNA and a 2 μL droplet, that 96% (±7%) of starting material remained in the droplet after it was translated across the CYTOP surface, compared with 90% (±8%) of the starting material in the droplet on PMMA and only 74%±11%1%) of the starting material in the droplet on the Zeonex (Supporting Information, Figure 3).
Similar(55)
Based on the above results, a new fed-batch fermentation process using an initial glycerol concentration of 20 g/L by KG1 was developed, the concentration and yield of 1,3-PD reached 872 mM and 64%, respectively, which were increased by 18%and16%6%, respectively, over the initial experimental levels.
The bi-functional catalytic materials, MCM-48 and Ru MCM-48 weRu MCM-48sized, characterized and investigated in the title reaction at total pressure of 20 bar hydrogen, using an initial arabinogalactan concentration of 0.4 were at 458 K.
Cells were inoculated in a 250 mL Erlenmeyer flask containing 100 mL liquid TAP using an initial cell concentration of 5 × 104 cells mL−1, and these were kept in the dark for 96 h.
The yield factor varies from 0.20 to 0.42 g/g using an initial sugar concentration of 20 g/L.
By using an initial pEndos concentration ([ N] T (0) = 50 nM or 1 μM, depending on the experiment) that was much greater than the PP2A-B55 concentration ([ P] T = 0.25 nM or 1 nM) and by limiting the incubation time, we ensured that only a small fraction of pEndos was dephosphorylated, facilitating a more accurate determination of the K m.
As oxygen was the reactant of interest (and was being depleted), using an initial oxygen concentration in an air-saturated buffer of 0.3 m m with the diffusion coefficient of oxygen at 3.42×10−5 cm s−1, the flux equation could be simplified to Equation (2): (2) The model was solved for a range of time spanning the experiment up to 1000 s, the results for these are presented in Figures 7 A C.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com