Sentence examples for using a thermal conductivity from inspiring English sources

H2 consumption was recorded using a thermal conductivity detector (TCD).

The signal was detected using a thermal conductivity detector (TCD) and the outputs recorded on a computer.

The catalytic reactions were done in a temperature programmed reaction system equipped with a quadrupole mass spectrometer SX 200 (VG Scientific Ltd, England) and a Gas Chromatograph (Mayura Analytical, India) equipped with chromosorb 101 column using a thermal conductivity detector.

Content of CO2 in the soil gas samples was analyzed by micro-chromatography with a VARIAN model 4900 (Agilent Technologies, USA) using a thermal conductivity detector and a 20-m PoraPLOT Q column using argon (Ar) as carrier gas.

While heating the sample from 100 to 400°C at a rate of 10°C/min with a N2 flow rate of 50 mL/min, the amount of NH3 desorbed from the catalyst was measured using a thermal conductivity detector.

For the determination of the dry bulk thermal conductivity λ and dry bulk thermal diffusivity α, the optical scanning method after Popov et al. (1999) was applied using a Thermal Conductivity Scanner developed by "Lippmann and Rauen GbR".

Metallic scrap and wire mesh have been used as a thermal conductivity materials to increase the thermal conductivity of the absorber plate.

To further improve the thermal conductivity a method that partially replaces microfiller with nanofiller was used, and a thermal conductivity, 24.3 times that of the epoxy, was obtained with 5 wt% MWCNTs + 55 wt% micro-SiC.

Spray evaporation is described using a thermal model with an infinite conductivity in the liquid phase.

This paper presents the results of a study to investigate the feasibility of using a constant thermal conductivity for intumescent coating when calculating protected steel temperature in fire, based on analysing a series of fire tests on intumescent coating protected steel sections with a range of section factors and intumescent coating thicknesses.

Hydrogen contained in the gas sample was analyzed using gas chromatography with a thermal conductivity detector (GC-323/TCD, GL Sciences , Inc.