Sentence examples for using a surface tension from inspiring English sources

Surfactants adsorption on kaolinite was determined using a surface tension technique and two phase titration methods.

Adsorption of surfactants was assessed using a surface tension technique for surfactant concentrations less than surfactant monomer saturation (CMC).

This corresponds to a pore-throat diameter of 2.35 nm; this estimation is based on the Washburn equation (1921), using a surface tension of 0.4 N/m and a contact angle of 130° for Wood's metal (Darot and Reuschle 1999).

The static contact angle of each PU scaffold (planar face) was measured using a surface tension-contact angle meter (DIGIDROP, GBX, France) at ambient humidity and temperature.

The meniscus was formed naturally using the surface tension of silicone gel, which leads to a higher level of the liquid around the edge of a container.

During initial characterization experiments, a mode of device failure was found when using low surface tension samples, resulting in nonspecific carryover of sample into the elution buffer.

The devices were released using low surface tension liquids and Rapid Thermal Annealing (RTA).

Furthermore, shape control is limited to what can be achieved using surface tension as a driving force.

Such morphology is produced by a surface modification concept using surface tension stress mechanism.

It floats on liquid surfaces using surface tension and is capable of movement using electrowetting on dielectric (EWOD) based propulsion.

When a surfactant is used, the surface tension tends to decrease at small particle concentration, while the surface tension does not change much when a surfactant is not used.