Sentence examples similar to using a sessile objective from inspiring English sources
Contact angles were measured on freshly polished surfaces using a sessile droplet device purchased from Digidrop®.
Contact angle measurement was performed on PPSU, PPSU/MWCNT and PPSU/FMWCNT films using a sessile drop method.
The wettability of the ion implanted CrAlSiN films by molten glass at 500 °C in controlled air under 1.7 Pa was measured by using a sessile drop method.
The effect of additions (Cr, Ni and 80Ni·20Cr) on the wetting characteristics of liquid Cu on ZrO2 have been studied using a sessile drop method.
Figure 1 shows the variation of contact angle of the hydroxylated Si 001) surfaces as a function of dipping time in the TPDA solution, which were obtained in this study by using a sessile water drop technique.
Water contact angle of the genipin-cross-linked silk sericin/PVA films was evaluated using a sessile drop method [ 20].
Scaffold hydrophilicity was measured through water contact angles using a sessile drop contact angle meter (KSV Cam 200, Espoo, Finland) [ 29].
Following the removal of any residual surface monomer with an ethanol wash, the unpatterned polymer surface polarity was quantified by measuring the water contact angles using a sessile drop method.
Water contact angles were measured on unpatterned surfaces for each polymer composition using a sessile drop method at room temperature (∼21 °C) with a Ramé-Hart NRL 100 00 goniometer (Ramé-Hart Instrument Co., Mountain Lakes, NJ).
Spectra were collected by focusing the laser spot at the air/liquid interface of a sessile drop of liquid (100 μL of each solution cast on a glass slide) by using a 100× objective (Olympus, NA 0.9), providing a spatial resolution of ∼1 μm.
Images were obtained using a 60× objective.
