Sentence examples for using a sessile drop from inspiring English sources

Contact angle measurement was performed on PPSU, PPSU/MWCNT and PPSU/FMWCNT films using a sessile drop method.

The wettability of the ion implanted CrAlSiN films by molten glass at 500 °C in controlled air under 1.7 Pa was measured by using a sessile drop method.

The effect of additions (Cr, Ni and 80Ni·20Cr) on the wetting characteristics of liquid Cu on ZrO2 have been studied using a sessile drop method.

Water contact angle of the genipin-cross-linked silk sericin/PVA films was evaluated using a sessile drop method [ 20].

Scaffold hydrophilicity was measured through water contact angles using a sessile drop contact angle meter (KSV Cam 200, Espoo, Finland) [ 29].

Following the removal of any residual surface monomer with an ethanol wash, the unpatterned polymer surface polarity was quantified by measuring the water contact angles using a sessile drop method.

Figure 1 shows the variation of contact angle of the hydroxylated Si 001) surfaces as a function of dipping time in the TPDA solution, which were obtained in this study by using a sessile water drop technique.

Contact angles were measured on freshly polished surfaces using a sessile droplet device purchased from Digidrop®.

The angle of contact between nanoparticles and water was measured using a static sessile drop method with a contact angle goniometry (DataPhysics OCA40 Micro, Germany).

The wetting behaviors of the amorphous and crystalline Fe78B13Si9 alloys by molten Sn and a low-melting-point Sn-57 wt%Bi alloy have been investigated by Zhang and colleagues [7 10] using a conventional sessile drop method.

In this article, we investigated the wettability of amorphous and annealing-induced nanocrystalline Fe78B13Si9 surfaces by molten pure Sn and Bi using an improved sessile drop method with a primary purpose to clarify the effect of this structural transition on the wettability as well as to determine the key factor that controls the wettability between them.