Sentence examples for using a scan speed from inspiring English sources

Three different scan areas using a scan speed of 20 nm/s were tested (Figure 2c, d).

Measurements were conducted under identical conditions for all the samples, using a scan speed of 100 nm/min and slit widths of 5 nm for both excitation and emission.

The induced CD spectra were recorded between 700 and 350 nm in a rectangular quartz cuvette of 10 mm path length and accumulated over 10 consecutive scans using a scan speed of 50 nm/min, a bandwidth of 1.0 nm, and a resolution of 0.2 nm.

To reduce random noise, we used a scan speed of eight and averaged over two scans.

The range of 2θ from 10° to 100° was used at a scan speed of 2°/min.

The parameters used were a scan speed of 3.72 mm/s, a frame rate of 7 Hz and a exposure time of 10 ms.

In contrast, using a high scan speed produced the disorderly liquid solidification front and considerably large balling, due to an elevated instability of the liquid induced by Marangoni convection.

The diffracted X-ray intensities were recorded as a function of 2ϴ using copper target, at a scan speed of 1.2° min−1.2°

Dr Denk is speeding matters up by using a scanning electron microscope instead.

To increase resolution, we used a slow scan speed, a very small z slice interval and a small pinhole optimized to 1 airy unit.

The powder X-ray diffraction (XRD) studies were carried out using a Shimadzu XRD6000 X-ray diffractometer (Shimadzu, Kyoto, Japan) at a scan speed of 5°/min using CuKα radiation.