The array slide was then dried by using acetonitrile (Sigma-Aldrich, St . Louis MO, USA) and immediately scanned in an Agilent C scanner (Agilent Technologies) using a scan region of 61 × 21.6 mm, resolution of 3 μm and output Tiff image of 20 bit.
(11) Visual/structural traits of our AMS targets were investigated using a scanning electron microscope (SEM), a high resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), and a Raman spectrometer.
Immediately after washing, the slides were scanned using a G2565CA Scanner System (Agilent Technologies), which used a scan protocol with a resolution of 3 μm and a dynamic range of 20 bits.
Papilloedema was evaluated with masked ultrasonography of the optic disc elevation and nerve sheath diameter (maximal retrobulbar pial diameter) by using a high resolution brightness scan (B-scan) with emission frequency 20 MHz and 10 MHz, respectively (Quantel Medical, Clermont-Ferrand, France).
The morphology of the porous materials was analyzed using a high resolution scanning electron microscopy.
Fig. 8 The printed 3D model (a) was imaged using a high resolution CT scan from which a virtual model was constructed (b).
This printed model was imaged using a high resolution CT scan and a virtual model was derived from the CT images of the printed model and registered to the original virtual model derived from patient CT images.
The quality of the air void system was investigated using a high resolution flatbed scanning and image analysis.
The printed model can be scanned using a high resolution imaging modality, e.g. a CT scanner or 3D laser scanner; the imaging modality must provide high resolution and fidelity to avoid compounding errors.
The proximal metaphysis of tibia were scanned using a high resolution micro-computed tomography system (μCT 35; Scanco Medical, Basserdorf, Switzerland) with nominal isotropic resolution of 12 µm.
