Sentence examples for using a reference measurement from inspiring English sources

For each Tx-Rx configuration, the measured CTF was calibrated using a reference measurement in which the Tx and Rx ports of the sounder were directly cable connected.

For that purpose, we have developed an original way to take into account the Instrument Response Function (IRF) by using a reference measurement in a known diffusive medium.

Based on this fact it was possible to correct for the aberrations of the eye in real time using a reference wavefront measurement, a pupil tracker and a deformable mirror without the real time contribution of the wavefront sensor measurements.

The parameters of resistance, compliance, and impedance are initially estimated based on the patient's age and sex, and can be subsequently refined by using a reference standard measurement of cardiac output.

The trueness of the results versus the values obtained was assessed using a reference method; density measurement was chosen for this study.

One of the stained samples was used as a reference measurement and the other one was used for an FCCP challenge test as described in the next section.

The method is based on the Wilcoxon signed-rank test and on the Levene test, which are nonparametric statistical inference techniques, and it establishes the relation that exists between the measurement results obtained using a reference instrument and the measurement results obtained using the electronic circuit under test.

These measurements can be used as a reference measurement data set to verify and validate CDRs of satellite derived SST.

The ECD spectroscopy was used as a reference measurement method; undoubtedly, this is the most appropriate spectral technique for describing chiral phenomena.

We have investigated and assessed both exposure systems for deposited aerosol particle mass and nicotine measurements using a reference cigarette (3R4F, University of Kentucky, USA) and a commercially available e-cigarette (Vype ePen, Nicoventures Trading Ltd., UK).

To improve the current glucose detection limit of the sensor simple measurements using a reference wavelength (i.e., with no glucose absorption) or an out-of-phase excitation at a reference wavelength could be envisaged.