Sentence examples for using a planetary mill from inspiring English sources
The phase stability of the powder sample was investigated by milling for 50 h using a planetary mill.
A number of elemental mixtures having initial compositions close to Al65Cu23Fe12 were mechanically alloyed at different energy intensities using a planetary mill.
In order to obtain very fine and homogenous samples, the resulting powders were subjected to high-energy ball milling using a planetary mill for 1 h.
Moreover, to understand how the mechanical properties affect the deposition characteristics, a high mechanical energy was applied to the two types of polymer powder using a planetary mill, and additional modeling was also carried out.
The milling was performed in a 250-mL chamber with 50 balls (each 10 mm in diameter) made of tungsten carbide (WC) material using a planetary mill Pulverisette 6 (Fritsch, Germany).
To analyze organic contaminants, aliquots were homogenized, freeze-dried, sieved (< 2 mm) and then milled using a planetary mill with vessels of zirconium oxide.
The nanopowders were mixed using a planetary milling plant 'Pulverisette 6'(Fritsch GmbH, Idar-Oberstein, Germany with isopropyl alcohol for 2 h for a uniform distribution of particles in the sample. The rotation speed of planetary disk is 160 rpm. To break the agglomerates, alumina milling balls were added to the container.
For this purpose, initial coarse Fe and Cr metal powders with an average particle diameter of 40 μm and Y2O3 oxide powder with an average particle diameter of 50 μm were mechanically milled using a planetary ball mill machine specially designed to carry out milling experiments at elevated vial rpm up to 2640 rpm.
To synthesize the (1−x)(CB11H12−x0.3Li(CB11H12) (x = 0.1, 0.3, and 0.5) complex hydrides, the mixed powder was mechanically milled using a planetary ball mill (Pulverisette 7, Fritsch) with 20 steel balls (each 7 mm in diameter) at 400 rpm for 20 h.
In a typical solid-state reaction process of Ti1 − x Cr x O2 samples, stoichiometric commercial-grade raw materials of TiO2 (99.9%) and Cr2O3 (99.9%) were milled using a planetary ball mill for 4 h at 450 rpm in ethanol.
the sonication, performed at 130 W and 20 kHz for 1 h (the best solution amongst different tested sonication times) using an ultrasonic processor (VCX130, Sonics); the ball milling, carried out at 300 rpm for 2 h using a planetary ball mill (Pulverisette 7, Fritsch), using WC grinding bowls and 0.5-cm-diameter balls.
