Sentence examples for using a negative resistor from inspiring English sources

Because the loss factors of the experimental apparatus tend to compromise the accuracy of the proposed methods, a method using a negative resistor is proposed, theoretically analyzed, and confirmed to eliminate some of the errors introduced by loss factors.

Elwakil, A.S., Kennedy, M.P. "Chaotic oscillator configuration using a frequency dependent negative resistor," Journal of Circuits Systems & Computers, vol.9, no.3-4, pp.229-242.

Using a 5.1k resistor and a 10k resistor, we get a baseline of about 1.7V, which is added to the AC component from the microphone input.

This system is suitable for the calibration of the standard resistors from 100 kΩ to 100 MΩ using the DMM-based method by the substitution technique where the unknown resistor and the standard resistor are indirectly compared in the same position using a dummy resistor as a short-term reference standard.

The first stage of amplification performed a current-to-voltage conversion using a feedback resistor of 20 MΩ.

Therefore, we decided to switch to using a pull-down resistor as opposed to a pull-up resistor.

Electrical conductivity of the composites is determined using a resistor network algorithm.

The proposed chip can easily produce phase shifts of signals by using a resistor chain.

The current from the charger to the battery (Ibatt) was measured using a current-sense resistor.

The gait sensor detects the force under the foot using a force-sensitive resistor.

The accuracy of the instrument was tested before the measurements by using a 422Ω standard resistor purchased with the analyzer.