Sentence examples for using a mixed solution from inspiring English sources

Chitosan has been known as a poorly spinnable polymer, often electrospun using a mixed solution of polyethylene glycol.

The templates, Ag NPs, were obtained from the reduction of AgNO3 using a mixed solution with 1 wt% of NaBH4 and 1 wt% of Na3C6H5O7.

First, the substrates were coated with TiO2 nanofiber films using a mixed solution (20 ml ethanol and 2 ml titanium (IV) isopropoxide) for enhancing the adhesion between TiO2 films and substrates, and were subsequently sintered at 500°C for 30 min to ensure good electrical contact between the TiO2 nanofiber films and the FTO substrates.

In this study, we developed a relatively nondestructive oxidation approach using a mixed solution of ammonium hydroxide and hydrogen peroxide for the generation of hydroxyl groups on NOA63 polymer surfaces and compared the effectiveness of this method with that of previously reported photooxidation approaches.

Fe2O3-promoted ZrO2 was prepared by the coprecipitation method using a mixed aqueous solution of zirconium oxychloride and iron nitrate solution followed by adding an aqueous ammonia solution.

The deposition of ultra-fine Pd/Ag/HAp nanoparticles onto TiO2 nanotubes has been performed by an electrochemical method using a mixed electrolyte solution.

The gas liquid equilibrium data for desulfuration of natural gas (NG) by using a mixed aqueous alkanolamine solution was investigated and the results were used for evaluating their ability of removing hydrogen sulfide.

The wealth of structural information available for this protein, and its conformational variability make Crh a unique model to evaluate the feasibility of structure determination for multimeric proteins, using a mixed set of solution and ssNMR restraints and chemical shifts.

Based on Nafion 115 membrane, MEAs were fabricated by spray method using a mixed slurry of Nafion solution and the prepared PtRu/C catalysts.

The prepared NiO films were sensitized by CdSeS QDs by the electrophoretic method using a mixed acetonitrile/toluene (1 2.5 v/v) solution by applying a DC of 50 V for a specific time.

For the NadA/LOX-1 characterization after 180 sec baseline in kinetic buffer (10 mM HEPES, 150 mM NaCl, 0,02% P-20 pH 7), AR2G tips were activated for 300 sec using a freshly mixed solution of 200 mM EDC in 50 mM NHS further diluted 1 20 in dH2O.