Sentence examples for using a low resistivity from inspiring English sources
Thus, using a low resistivity (<1.5Ωcm) base material higher efficiencies compared to an aluminium back surface field can be achieved.
Therefore, an economical and efficient grounding system design of the earthing pit is necessary which can be achieved by using a low resistivity material (LRM).
In this chapter, the authors attempt to identify via a 2i factorial design of experiment the interactions between injection parameters, volume resistivity, surface resistivity and surface finish, using a low viscosity polycarbonate (melt flow index, MFI, 38 g/10 min) and then verify the interactions in more detail using a higher viscosity polycarbonate (MFI 20 g/10 min).
Using a low grade detergent.
Using electric resistivity measurements, Uehara et al. (2007) showed that a high-resistivity landmass of 3 100 Ω m exists to a depth of 30 m beneath the beach, and a low resistivity (less than 2 Ω m) prevails below the bottom of the high-resistivity landmass and adjacent sea bottom.
They found areas with a low resistivity south-west of and beneath Mt. Fuji, but a notable low resistivity area was not detected beneath the Tanzawa Mountains.
The film has a low resistivity of ∼80 μΩ-cm and is more stable compared with high resistivity films with high nitrogen flow rates.
The GZO films showed a low resistivity of 5.95 × 10-4 Ω cm.
The resistivity structure (Fig. 3) shows that a low resistivity of less than 1 Ω m prevails beneath both land and sea.
A low resistivity zone [zone (1), on the resistivity slice map related to the depths below 300 m] has extended from northwest to the centre of the area.
