Sentence examples for using a low rate from inspiring English sources

In contrast, in this work, the detection problem is addressed by using a low rate sampling device to capture sub-Nyquist samples.

Using the CSI, the destination performs subset selection, and using a low rate feedback link feedbacks the index of the antennas to be used by the source and each relay stage.

In this paper the principle of extending the axial range was demonstrated using a configuration with P = 4 delays in 4 independent channels and using a low rate tunable swept source, where the bandwidth due to tuning was small.

We used a low rate of vascular filling to maintain MAP ≥50 mm Hg rather than keeping the volume constant and allowing pressures to vary.

Further, we use a low rate of spontaneous modification loss µ = 0.03 so1, so that the lifetime of modified, cytoplasmic cdr2p is relatively long.

Transmitters may adapt their signals using a low-rate feedback from the receiver [17].

In [11], a method for tracking containers using a low-rate wireless personal area network is proposed.

Many recent techniques employ CS to sample sparse signal of interest at sub-Nyquist rate using a low-rate sampler as in analog-to-information (A/I) converter.

Finally, the output is sampled in the presence of additive white Gaussian noise (AWGN) using a low-rate A/D converter at 40 M samples/s, i.e., at 1/4 times less than the traditional Nyquist sampling rate.

It is worthwhile pointing out that the ZnO NWs were also eliminated by performing an extended two-step nitridation: first at 500°C for 60 min and then at 620°C for another 60 min using a low ramp rate of 10°C/min and a steady flow of 250 sccm of NH3 throughout the entire process.

RCPC codes use a low-rate convolutional mother code and employ various puncturing patterns to obtain various code rates.