Sentence examples for using a hydraulic actuator from inspiring English sources
It was assumed that the column at the location of ⑤-ⓓ of the prototype structure shown in Fig. 1a was suddenly removed by accident, and displacement-controlled monotonic pushdown force was enforced at the middle column of the specimens using a hydraulic actuator with maximum capacity of 2000 kN and maximum stroke of ±250 mm.
For the microarray experiment, the right tibiae of 15-week-old female WT (n = 32), ovariectomized (WT-OVX, n = 32), neurectomized (WT-SN, n = 40) and ERα−/− mice (n = 24) were subjected to a single period of dynamic axial load using a hydraulic actuator under feedback control (Dartec HC10, Zwick Testing Machines Ltd., Leominster, UK).
Strength was measured by using a hydraulic Jamar gauge.
The first system uses a conventional hydraulic actuator capable of initiating a tilt angle of 6°.
The three point bending scheme is adopted for testing specimens, where an hydraulic actuator is used for the transmission of the transverse load at midspan under displacement control and an LVDT is used to measure the corresponding maximum transverse displacement.
This work presents an adaptive cascade controller tuned by using evolutionary algorithms for the trajectory tracking control of a hydraulic actuator with an overlapped proportional valve.
A hydraulic actuator equipped with a damper is used as the control actuator at the right boundary of the string.
This device uses an original hydraulic actuator, based on two tandem pumps, designed to be used in addition of a reduced anti-roll bar.
Force control with a hydraulic actuator is challenging and requires complicated control algorithms used along with high crossover frequency electro-hydraulic valves, even for simple force control tasks.
This study addresses the design and use of an orifice to provide the desired control to a hydraulic actuator system.
A micro-hydraulic actuator using a novel actuation principle (termed hydrostatic actuation) for MEMS is presented.
