Sentence examples for using a flow injection from inspiring English sources
A procedure is proposed in which the determination of hydroquinone using a flow injection system with electrochemical detection is described.
Two well-defined phases were formed and the acid aqueous one containing the extracted cadmium ions was analyzed by TS-FF-AAS using a flow injection system.
The performance of Al2O3/MWCNT nanocomposite as a new sorbent for Ni II) preconcentration from water samples, using a flow injection system coupled to flame atomic absorption spectrometry, is described in this study.
Nutrient concentrations were measured colorimetrically using a flow injection analyser and biochemical processes were determined as the difference between nutrient concentrations at the beginning and end of a 1-week incubation period under controlled aerobic and anaerobic conditions, respectively.
The sensor measurements were carried out in the initial-rate mode using a flow injection (FI) system, resulting in 60 s for one sample analysis followed by a recovery time less than 10 min.
Volatile species of gold in acidified medium were generated at room temperature by the reduction of NaBH4 using a flow injection vapor generation (FI-VG) system, and trapped in situ on the graphite furnace inner wall to get ETAAS detection.
We use a flow injection analysis (FIA) technique and successfully demonstrate its capability to measure Fe concentrations directly in the sample without an on-line preconcentration/matrix separation step.
Electrodes were tested using a flow-injection system, as previously described.
We used a flow-injection-based lipidomic approach with ∼200 multiple reaction monitoring (MRM) transitions to pre-screen fatty acyl composition of phospholipids in the yeast Saccharomyces cerevisiae mutants.
For example, Yamaguchi et al. [ 62] used a flow-injection type device to continuously supply the substrate, maltopentaose; meanwhile two enzymes α-glucosidase (GD) and GOx were incorporated to measure the sAA activity based on (5), (6), and (1).
The biosensor was used in a flow injection analysis system.
