Sentence examples for using a diode configuration from inspiring English sources
The prepared emitter generates very high current density of ∼11.2 A/cm2 when measured using a diode configuration.
The electron field emission measurements were carried out using a diode configuration, a cathode (sample), and a parallel anode plate at a distance of 150 μm in a vacuum chamber (2 × 10−6 Torr).
Infrared reflectance images were generated using a diode laser at 830 nm.
Phalloidin was imaged by using a diode laser at 405 nm also mounted on the microscope.
The absorbance was measured using a diode array detector at 286 nm.
Sugars were detected by indirect UV detection using a diode-array detector.
Spectra were obtained using a diode-array spectrophotometer for both standard and kinetics measurements.
UV visible spectra were measured using a diode-array Agilent 89090A spectrophotometer.
Briefly, a diode configuration is used, in which a molybdenum rod of 3 mm diameter (area: 0.071 cm2) serves as the anode.
A diode configuration field emission X-ray source using the MWCNT/RNA hybrids on tungsten wire tip was tested and found to provide clear X-ray images.
Using CVD grown CNT arrays, Ryu et al. [205] reported emission currents of up to 90 mA (emitted area not stipulated) in a diode configuration, although in a gate-controlled triode arrangement, the beam currents were substantially reduced.
