Sentence examples for using a conventional load from inspiring English sources
In this paper errors were verified in corrosion-fatigue tests using a conventional load cell.
The power consumption of the developed system was reduced from 100%to25%5% when the full load was reduced to a partial load of 17%, saving more than 75% of the work required using a conventional un-loading method.
The application of a tapered load allows patients to get close to maximal inspiration, even at high-training intensities (figure 1). Figure 1 illustrates a comparison of a single breath (training at an intensity of 60% Pi,max) using a conventional constant threshold loading device, with that of a variable flow resistive loading device (POWERbreathe KH1).
In addition to combined tension-shear loading which can be achieved using a conventional Arcan fixture, the MAF allows the application of pure compression and compression-shear loading.
20 wt.% Pt nanoparticles with ∼7 nm are loaded onto the WO3 microspheres using a conventional microwave-assisted ethylene glycol (EG) method.
The card was loaded by first using a needle to pierce the film above the loading port, followed by adding a sample using a conventional 200-μL pipette.
To achieve these objectives, six ½-scale slender reinforced concrete walls were tested using a conventional quasi-static cyclic incremental lateral displacement test protocol with a constant axial load.
The research investigates the feasibility of a ramp load/unload (L/UL) controller using a conventional, non-L/UL disc drive actuator.
Baseline thresholds are determined by the use of a conventional load-shedding technique.
A procedure to establish nominal loads for use in a conventional load-and-resistance-factor-design format is presented.
A prismatic concrete specimen with a hole at its centre is placed in a new device, called seesaw, and with the use of a conventional loading machine in compression mode, a tensile stress is applied to the specimen for the determination of the indirect tensile strength.
