Sentence examples for using a bar coater from inspiring English sources

A thin solid silica UV-cured film was prepared by coating the dispersion of commercial silica nanoparticles in a UV-curable acrylate monomer on a glass substrate using a bar coater.

In this study, we report on the coating of laccase from Trametes versicolor on papers using a laboratory coater (Cylindrical Laboratory Coater) that simulates realistic conditions similar to those obtained with industrial coaters.

All freeze dried samples were coated with gold using a sputter coater (Emscope Sc 500).

The continuous and 2 μm thick seed layer of silicalite-1 crystals is fabricated by using a spin coater.

The stubs were then coated with gold to a thickness of about 300 Å using a sputter coater.

The UV polymer with a thickness of 120 μm was coated on the silicon substrate by using a spin coater.

The polymer PCA-30000 PM) with a thickness of 150 μm was firstly coated on the substrate using a spin coater.

Prior to scanning, the adsorbent was coated with gold using a sputter coater and subsequently the SEM images were taken.

Then the solution was coated to LAO using a spin coater with a rotation speed of 6,000 r/min and dried at 150 200 °C for 5 10 min.

PMMA was coated on the samples using a spin coater at 3000 rpm for 30 s and heated at 60 °C for 10 min.

The samples were dried with a critical-point drier (JEOL JCPD-5, Tokyo, Japan) and coated with Pt/Pd using a sputter coater (Hitachi E-1030, Tokyo, Japan).