Sentence examples for using a bandpass filter from inspiring English sources

Additionally, the subband sidelobe level can be significantly suppressed by using a bandpass filter (BPF).

After the waveform data were filtered using a bandpass filter of 2 3 Hz, the semblance coefficient was calculated for a time window of 0.5 s.

To improve the simple onset detection introduced in the last paragraph, the signal can be split into six nonlinear bands using a bandpass filter bank.

First, a temporal filter was applied to remove any artifact due to respiration and cardiac variation using a bandpass filter with a range 0.01 0.5 Hz.

Green fluorescence (from double-stranded DNA) was detected using a bandpass filter (530 nm±15) and red fluorescence (single-stranded DNA) using a longpass filter (>650 nm).

Fluorescence data were acquired using a bandpass filter from 500 to 550 nm for emission light.

In Fig. 7(b), we used a bandpass filter centered at 450 nm with an FWHM of 10 nm for autofluorescence acquisition.

The donor channel (Alexa-488) used a band-pass filter centered at 529 nm with a 90% transmission width of 28 nm, and the acceptor channel used a bandpass filter centered at 630 nm with a 90% transmission width of 50 nm.

To enhance visualization of individual gp210 subunits, we applied a smooth filter in ImageJ to enhance features signals, but it was not sufficient and for that we used a bandpass filter to reduce edge pixels artifacts and enhance contrast (Fig.  3b).

The collected fluorescence from the sample was filtered using a bandpass emission filter (ET700/75, ET600/75 and ET525/50, all Chroma), for far-red dyes, red dyes and green dyes respectively) and imaged onto an EMCCD camera (IxonEM+, Andor) with a 100 nm pixel size and using the conventional CCD amplifier at a frame rate of 25 frames per second.

Also, the quality of range finding by using the proposed algorithm of image processing is superior to that of using a bandpass optical filter.