Sentence examples for uses the configuration of from inspiring English sources

From the performance evaluation described above, we observe that when our wake-up radio, with a spreading code set SC1, uses the configuration of the OS rate of 32 and the PR of 1 packet/s, our design has better SER of 1.13 × 10-3 in a given SNR of -18 dB, which means the high sensitivity -136 dBm.

The electrolytes were 0.1 M BMP.TFSI in propylene carbonate (c) and 0.2 M TBA.PF6 in acetonitrile (d) [1]. Figure 2b shows torsional rotation and tensile actuation versus time for a CNT yarn muscle (with a 40° yarn bias angle for CNT orientation with respect to the yarn axis) that uses the configuration of Figure 2a.

uses the configurations of the selected scaffold by linking possible side chains to elucidate suitable chemical structures corresponding to the input molecular weights of a mixture.

Extensive simulation studies are then performed using the configuration of a vehicle under construction.

Therefore, we use the configuration of 30% of FPR and H2 for both stages in the remaining experiments for IPv4.

An aluminum foam model has been constructed by using the configuration of DCB and TDCB models in this study.

However, it cannot flow out in the compressible model using the configuration of van Zanten et al. (2011) due to the periodicity in the lateral boundary condition.

These tests have been conducted using the configuration of ray paths from the source to the receiver that resulted from the seismometer deployments described above.

Torsional actuation was obtained using the configuration of Figure 3d, where a one-end-tethered, plied, non-coiled yarn supports a paddle on the free end.

Experimental results for the CL-PM, discussed in Section 'Simulation results for a solar energy harvesting WSN platform', have shown that an average data-rate of about 45 bits/s can be obtained using the configuration of the EZ430 platform.

If a user wishes to exactly reproduce the model the exported configuration can be uploaded to the model development web page (OCHEM menu: "Models"/"Create a model") using "Import an XML model template" or just use the configuration of the previous model ("Use another model as a template").