Sentence examples for used for structural design from inspiring English sources

Wood has always been one of the few (natural) materials used for structural design.

Since the new target finite element mesh could result in a finite element solution of desired accuracy, the finite element solutions so obtained can be used for structural design in engineering practice.

The use of numerical simulations for capturing the transient structural response has become increasingly used for structural design against impact loads.

This feature could be seen as an add-on to what can be done with experimental methods and enables further possibilities when the predictive character of such simulations is used for structural design or even for the development and optimization of the additional devices themselves.

Wind from a translating microburst was simulated using empirical relationships that were derived from measurements of a laboratory-simulated microburst and the bridge response calculated to compare it with those induced by an equivalent straight-line wind that is used for structural design.

JSCE recommendations were proposed based on Ductal® (Orange et al. 1999), which is commercially available UHPFRC with heat treatment and 2 vol.% of steel fibers having d f  = 0.2 mm and L f  = 15 mm, and provided the strength properties used for structural design as follows; f c ′ = 180 MPa, f crk  = 8 MPa, f tk  = 8.8 MPa, and E c  = 50 GPa.

These so-called iBMB parametric fire curves are formulated with the help of simplified empirical equations which can easily be used for structural fire design as part of a performance-based natural fire design concept.

The model proposed here provides a closed-form solution for which it forms a platform which can be used for structural steel arch design and evaluation in the development of codified approaches to fire design on a performance based design.

The proposed model provides a computationally superior formulation to that of commercial finite element packages, and forms a platform which can be used for structural steel arch design and evaluation in the development of codified approaches to fire design on a performance basis.

Hence, the model can be used for structural fire engineering design on steel-framed composite buildings.

While previous adhesives were relatively strong but brittle, the adhesives currently used for structural bonding by the automotive industry are designed with the aim of providing the joint with high ductility and high mechanical strength [1].