Sentence examples for use the same simulation from inspiring English sources

We use the same simulation setup as in Figure 4.

We basically use the same simulation scenario as used in Section 6.1.1 except.

We use the same simulation parameters as in Figures 5 and 6 but we set the SNR to 13 dB.

We use the same simulation scenario as used in Section 6.1.3 for this study except that TYPE-1, TYPE-2, and TYPE-3 are used instead of STS-1, STS-2, and STS-3.

We continuously use the same simulation scenario as employed in Section 6.2.1, but we have the following modifications on the scenario: each simulation set uses a different number of stations per region, varying from one to five; each simulation set has 10 number of runs, each of which is executed with a different seed; all the regions are free from wireless link errors.

We use the same simulation scenario as used in Section 6.3.1 for this study except what follows: there is no mobile scenarios for any station; all the regions are assigned to the same weight; wireless link errors specified in Section 6.1.2 appear in the period of [60s,120s].

We have used the same simulation parameters as we used in simulating the eigenvalue ratio detectors except that the input signal is amplitude modulated so that it shows cyclostationary behaviour and the SNR is −5 dB.

Besides, a Non-linear Regression (NR) is also presented using the same simulation results.

Then, using the same simulation protocol, the binding mode of salacinol and its derivatives has been predicted.

The transition method is first validated by comparing DD and ASs of interactions with one precipitate using the same simulation conditions and, then, applied in massive DD simulations for the prediction of hardening as a function of precipitate size, density and shear resistance over a large range of temperatures.

Comparisons are made between RCFE and PBFE using the same simulation setup of Figure 1.