Sentence examples for use of peel tests from inspiring English sources

Further use of peel tests is reported in Riul et al. (2012) [11].

This new type of peel tests is inspired on the standard floating roller peel test widely used for metal bonding.

This paper introduces a new type of peel tests dedicated to composite bonding: Composite Peel Tests.

The results of peel tests of this improvement are displayed in Fig. 8.

However, the results of peel tests were not conclusive because the unexposed specimens of this series were fabricated much later (in 2006) than 1992 and could not be made from exactly the same materials used in 1992.

Significant research has been performed using these type of peel test for metal bonding with diverse objectives, including adhesives screening, effect of surface pre-treatments, bond durability, etc. [2-4].

In this study, work of adhesion and peak adhesive force determinations using the peel tests provided more sensitive results for evaluating the bioadhesivity of the HME films than the tensile tests.

From the analysis of the results, the following conclusions were drawn: When assessing interface quality of composite bonding using peel tests, a third failure mechanism is likely to occur, beyond the conventional two failure modes (adhesive failure and cohesive failure): intralaminar failure of the composite.

Adhesive joint leather/PU: types of failure of the peel tests.

Adhesive joint leather/TR: types of failure of the peel tests.

The interfacial fracture energy was evaluated by using a 180° peel test and by calculating the plastic deformation energy of the peeled metal and polyimide films from an energy balance relationship during the steady-state peeling process.