Sentence examples for use of high factor from inspiring English sources

The use of high factor sunscreen and seeking shade were both higher among older age groups.

Possession of educational qualifications was associated with greater use of high factor sunscreen and seeking shade, and less use of covering up (although this latter result was not an independent effect).

Additionally, the use of high impact factor journal solves a criterion challenge as to which articles to include and which to exclude in a more systematic manner.

The use of high sunprotection factor sunscreens has also been widely promoted for the prevention of skin cancer, including melanoma.

A number of recent reports in the MRI literature have established that substantial signal-to-noise ratio (SNR) gains can be achieved with small samples or low resonance frequencies, through the use of high-quality factor high-temperature superconducting (HTS RFF receive coils.

Beam R6 demonstrated much higher web-shear capacity than expected, owing to the use of higher fiber-factor.

The use of higher oversampling factors is still limited by the switching frequency of the power output bridge (see Section 3.6).

While testing Beam R4 it was found that the shear capacity was surprisingly increased beyond the anticipated value due to the use of higher fiber-factor.

This can be attributed to the fact that with the use of higher fiber-factor, more steel fibers are available in bridging and intersecting the shear crack.

The latter allows for either the improvement of spatial resolution or the reduction of imaging time with the use of higher acceleration factors (e.g. applying parallel imaging techniques) [76].

The factor m×n ranged from 4 to 12. Distortions increased in the frontal cortex near air sinus regions of high susceptibility with the use of higher m-factor as shown in the first column of images in Fig. 2. The average time to acquire an image (for 2 mm acquisitions) is 72 ms (1×1), 23 ms (2×2), 18 ms (3×2), 10.5 (4×3) ms, which is the minimum TR in Table S1 divided by the number of slices.