Your English writing platform
Discover LudwigSuggestions(4)
Exact(4)
Figure 2 The signal received at BS b sent from user v can be strongly interfered by the transmission of user u since u has to use a relatively high power in order to send its signal to BS a in long distance.
We chose to use a relatively high carnosine concentration (20 mM) because of the nature of the employed paradigm where we triggered acute and intense [Zn2+]i rises.
Using cross-correlation, the resolution in time is dictated by the sampling frequency of the recording and therefore we will use a relatively high sampling frequency of 1000Hz.
Use a relatively high resolution on your camera, but make sure you set it to take jpeg, not RAW, images, to conserve file size.
Similar(56)
With standard radiology, that means using a relatively high dose of X-rays, significantly increasing the risk that the screening itself will cause cancer in a previously healthy patient.
A friction velocity of 1 m/shas been used, a relatively high air velocity for an indoor environment which may represent an extreme situation, e.g. the opening of a window with a strong air current.
When coarse LWA is used, a relatively high replacement level of normal weight coarse aggregates is required in order to eliminate autogenous shrinkage; the content of LWA should be on the order of 500 kg/m3 of concrete.
Therefore, we show that digestion of cell matter using a relatively high concentrated sodium hypochlorite solution with the subsequent addition of water mediates efficient digestion of non-PHA biomass and clear separation, which is due to the insolubility of PHAs in water.
Pellets with very good pharmaceutical quality (low proportion of sticked pellets, low friability and good flow properties) can be obtained in conventional coating pan via the powder layering technique with a good layering powder efficiency by using a relatively high pan speed and a high concentration of binder solution.
In this paper, an investigation on statistical distribution of soil loss measurements was firstly carried out using a relatively high number of simultaneously operating plots of different lengths, λ (11, 22, 33 and 44 m) at the experimental station of Sparacia (southern Italy).
In the primary screen, we used a relatively high concentration of dsRNA (100 nM).
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com