Sentence examples for upper cladding from inspiring English sources

A stripe width of 2 μm is clearly shown and the etching was stopped right above the upper cladding layer as described previously.

The proposed ridge waveguide consists of arsenic pentasulfide (As2S5) strip deposited on magnesium fluoride (MgF2) substrate and air acting as an upper cladding.

Due to the influence of upper cladding layer heat, the eutectic structure in the interlayer bonding zone is obviously coarsening in organization coarsening zone.

An efficiently tunable and fabrication tolerant microring resonator (MRR) based on a double-slot waveguide with nematic liquid crystal (LC) upper cladding layer is proposed.

The sensing arm which is covered by the DNA as upper cladding has 0.45 x 10−3 decreasing power in comparison to the reference arm.

The hybrid organic/inorganic waveguide structure includes poly-methyl-methacrylate-glycidyl-methacrylate (P MMA-GMA)), SU-8 2005 and silica as core, uP MMA-GMAding and under cladding, respectively.

The proposed structure works well with low crosstalk level of −28 dB and low switching power relatively to the structural upper cladding thickness.

For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.18 dB/cm at 1550 nm.

A small part of the wafer is etched by chemical etching to thin the upper cladding layer with H3PO4-H2O2-H2O (1:1:4) after the laser epitaxial structure was completed [17, 18].

A rib waveguide structure with a core of As2Se3, upper cladding of air and lower cladding of MgF2 is proposed for generation of a very broad and flat supercontinuum spectrum.

For waveguides with the polymethylmethacrylate as upper cladding, the propagation loss of the channel waveguides was measured to be 0.25 dB/cm at the monitoring light of 1550 nm.