In contrast to the conventional method which deals with only a single ground motion for equivalent linearization of soil properties, a design response spectrum defined at the upper level (bottom of the surface ground) of an engineering bedrock can be handled as the target design earthquake in the present paper.
Approximately 100 µl of cells were transferred to the upper chamber, and the bottom of the upper chamber was coated with 1 mg/ml fibronetin (Millipore; Bedford, CA, USA), while the lower chamber was transferred with the medium containing 20% FBS.
CW differed from each other in flow type (free water surface flow, subsurface flow or hydroponics), plant species (Typha angustifolia, Phragmites australis or unplanted) and effluent position (upper part or bottom of the tank).
On the other hand, the mounds at the upper left and bottom of Fig. 3b (only several kilometers apart) show relatively dark and bright surfaces, respectively.
The primary tumor and upper neck above the bottom of hyoid bone (level II and upper level V) was treated with IMRT techniques using seven coplanar beams, separated at 51° apart.
Vibrating Wire (V.W) strain gauges were embedded in length direction at mid span along the upper and bottom layer of reinforcement of each beam to monitor the growth of strain at regular interval of days.
Mobile: Click on the 3 horizontal lines (upper right Android and bottom of iOS screen) to bring up the menu and scroll down and tab Account Settings > Apps.
Fig. 2 Global distributions of: (a) thickness of sediments; (b) depth to bottom of upper crust; (c) depth to bottom of lower crust; and (d) lithosphere-asthenosphere boundary (LAB) depth.
The design uses fabric panels along the spine and from the upper pectorals to the bottom of the scapula (the shoulder blade) to effect the change.
The thickness of the tissue sample was then deduced from the relative position of the upper platen to the bottom of the chamber.
After removing the bark from each branch disc a block of wood (about 2 cm in length in both tangential and longitudinal directions) was cut from the top of upper side to the bottom of lower side through pith.
