Sentence examples for unit and thickness from inspiring English sources

The results showed that the position of the backrest roller has a significant effect on the breaking strength in the warp direction, weight per area unit, and thickness of fabric.

The test fabrics in this study differed from one another by fabric structure and inherent fabric properties such as mass per unit area and thickness.

Parametric studies were performed to elucidate the effects of total mass (per unit area) and thickness ratio on the maximum transverse deflection.

The damage suffered by the geotextiles (in the different degradation tests) was evaluated quantitatively by monitoring changes in their physical (mass per unit area and thickness) and mechanical (tensile behaviour) properties.

They are defined by equivalent properties based on respective portion of unit and mortar thickness.

Chen et al. (2007) proposed that the principles of layer regrouping are that the permeability contrast (defined as a ratio of maximum to minimum permeability in the same development unit) should be less than 10, the layer number should be no more than 10 in the same development unit, and the thickness of the commingled production layers should be less than 20 m.

Fabric bulk density was calculated as the ratio between fabric weight per unit area (g/m2) and thickness (mm) as shown in the following equation: Bulk;density;({text{kg}}/{text{m}}^{3} ); = ;frac{weight/area;}{thickness;}; (1).

The parameters for each layer i are its thickness (h_{i}), shear modulus (G_{i}), shear wave velocity V i, damping ratio (zeta_{i}), unit mass (rho_{i}), and thickness h i  = z i  − z i-1.

Fig. 4 a Distribution of Unit A (PDC deposits) and thickness data near the summit area (unit is cm).

The etched cordierite channels can induce the Mn-Co-O arrays with larger unit size, higher density and thickness.

Now if we consider a prism of unit cross-section, with thickness (h) and resistivity (rho), the resistance (R) normal to the face of the prism, and the conductance ((S)) parallel to the face of the prism can be given as (Patra and Nath 1999), R = hrho (4 and S = frac{h}{rho } = hsigma (5)This is when considering of a prism of aquifer material having unit cross-sectional area and thickness h.