Sentence examples for uniform outer from inspiring English sources

Balls must have a uniform outer surface, and, if there are any seams, they must be stitchless.

A much thinner (≈10 μm) and uniform outer layer was achieved.

They had the uniform outer diameter in ca. 100 nm and the thickness of each shell in ca. 5 nm.

RGO/MnOx@HCNs have a regular hollow structure with uniform outer shells (∼10 nm) and inner spherical pores (∼150 nm), high surface areas (493 668 m2 g−1), and high contents of MnO2 (12.2–19.6 wt%).

A high and uniform outer wall temperature distribution is desirable for the L2 micro combustor, therefore, the L2 micro combustor is more suitable for the micro thermo photovoltaic (MTPV) system when hydrogen volume flow rate is equal to 150 mL/min and equivalence ratio φ is equal to 1.0.

This is accounted to the unique periodic structure (periodic stacking of layers one above the other in such a way to leave uniform outer diameter) of these BS-CNTs.

At high excitation levels (u′/Um≈0.3) for Um= 5m/s where non-linear flame response is expected, the flame exhibited a reduced amplitude response in the frequency range between 40 and 100 Hz for the uniform and outer equivalence ratio gradient cases and no discernible effect for the inner equivalence ratio gradient.

Optimal growth for small tubes with specific sizes has been realized during this investigation, for example, high quality uniform ultrasmall (outer diameter D ∼ 10 nm, wall thickness d ∼ 3 nm) tubes can be grown without sacrifice of the growth rate (0.3 0.4 μm h−1).

The idea is that the suit will fit comfortably underneath the uniform and outer protective gear to provide functional and adaptive support.

Response of bluff-body stabilized conical turbulent premixed flames was experimentally studied for a range of excitation frequencies (10 400 Hz), mean flow velocities (5, 10 and 15 m/s) and three different spatial mixture distributions (uniform, inner and outer enrichment).

The homogenization problem is solved using ABAQUS by the application of uniform deformations on specific outer surfaces of the composite RVE and the use of tetrahedral finite elements C3D4.