Sentence examples for undesirable mode from inspiring English sources

This may be a reflection of the undesirable mode of drug delivery of LMWHs (requiring once- or twice-daily subcutaneous injections), as well as their substantially higher drug cost compared with VKAs.

In order to prevent spillovers from the modal couplings of feedback forces, the distributed actuators are spatially shaped to be orthogonal to those undesirable modes.

Favorable failure modes of the repaired girders can be maintained using a CFRP repair configuration utilizing spacing between the U-wrappings to prevent undesirable modes of failure such as debonding of the longitudinal CFRP strips from the girder concrete soffit.  .

Favorable failure modes of the repaired girders can be maintained using a CFRP repair configuration utilizing spacing between the U-wrappings to prevent undesirable modes of failure such as debonding of the longitudinal CFRP strips from the girder concrete soffit.

Past research has shown that directly welding hollow circular steel pipes to a steel cap beam, regardless of weld configuration, does not mitigate the undesirable failure mode of brittle cracking in the welded region.

Generator speed deviation and its derivative are selected as input signals to a fuzzy logic system that approximates unknown power system functions and a proportional integral regulator is used to eliminate the undesirable sliding mode chattering.

Further, the undesirable failure modes are balanced with the yield mechanisms and the preferred failure mode, brace fracture, to ensure that the frame fails in the desired manner.

The experimental results also show that there are no undesirable vibration modes around the working frequency, thus it becomes convenient for the vibration control.

CFT components encourage the optimal behavior of each material (concrete and steel) while providing a symbiotic relationship between the two to mitigate undesirable failure modes.

However, past experimental studies have indicated that undesirable failure modes could occur in the gusset plate even when using a linear clearance rule in the design of the gusset plate, especially when connecting hollow rectangular shapes.

Moghaddam believed that the design generated undesirable torsional modes.