The phrase "under a constant potential" is grammatically correct and can be used in written English.
It is typically used in technical or scientific contexts to describe a state in which an object or system is being affected by an unchanging electrical, gravitational, or other type of potential energy. Example: In the experiment, the metal rod was placed under a constant potential of 10 volts, causing it to undergo a steady flow of electrons.
The copolymerization of aniline and 2,4-diaminophenol (DAP) was first carried out in an acidic solution under a constant potential of 0.75 V.
The electropolymerization of composite films of polypyrrole-polyvinyl sulphonate was performed under a constant potential of 800 mV from aqueous solutions.
Under a constant potential bias of +1.0 V and a light intensity of 15 mW/cm2, 107 cfu/mL E. coli could be completely inactivated within only 30 min by using the composite photoanodes obtained from 120 °C hydrothermal treatment.
The periodic oscillating current recorded under a constant potential step for Au/acid solution interfaces containing different concentrations of Cl− ion is studied in the 25 50°C range.
The pitting corrosion of 316 stainless steel (SS) in phosphate-borate buffer (pH 8.00) containing 0.5 M NaCl at 25°C is studied through current transients run under a constant potential step, potentiodynamic runs and scanning electron microscopy.
In addition, the electrolysis of m-nitrophenol under a constant potential indicates that the reduction current of m-nitrophenol on the Pd/GC electrode is approximately 20 times larger than that on the bare GC electrode.
This work domain is more dynamic than those previously studied under EID because there is a constant potential for the addition and removal of devices, as well as changing configurations, making it important to study the generalizability of the framework.
The addition of sulfite resulted in a rapid increase of oxidation current at a constant potential of +0.1 V under hydrodynamic conditions.
Either a constant current or a constant potential is applied to the preweighed working electrode.
In this experiment a constant potential (−0.6 V) was applied on CPE, MOF-199-CPE and Pd/SWCNTs@MOF-199-CPE under optimal conditions (Fig. 9).
Meanwhile the stationary anodic current was recorded under a constant anodic potential Ea applied to the exit side.
