Sentence examples for ultimate torque and from inspiring English sources

The autografts displayed greater ultimate torque and torsional rigidity compared to the allografts over time.

Various types of torsional performance (i.e., first-cracking torque, ultimate torque, and twist angles) were compared experimentally to evaluate the performance of the RC beam specimens.

Multivariate regression analysis demonstrated significant statistical correlations between combinations of the micro-CT parameters (graft and callus volume and cross-sectional polar moment of inertia) with the measured ultimate torque and torsional rigidity (adjusted R2=44%and50%0%, respectively).

By the same algorithm, the support ultimate torques can be obtained, and the smaller one between the mid-span ultimate torque and the support ultimate torque is the true ultimate torque.

According to the rotation curves, the ductility coefficient (ratio between the rotation corresponding to the torque decreased to 85% of the ultimate torque and the rotation corresponding to the first yielding of reinforcement) can be calculated, and the ductility coefficient can also be calculated from deflection curves.

As shown in Table 2, with the T M ratio increasing from 1 5 via 1 1 to 1 0, the diagonal cracking torque was reduced from 49 via 33 to 24% of the ultimate torque; and the first diagonal crack in MEM-1 5 MEM-1 5-1:1 wandflexural-shear type initiating at the 3L/8-section and 5L/16-section, respectively, while the first diagonal crack in MEM-1 1 MEM-1 1eb-shear type initiated at the L/4-section.

Table 5 Comparison of test ultimate torques and calculated ultimate torques.

The cracking torque and ultimate torque of MEM-1 1 MEM-1 1culared to illustrate the proposed method.

To illustrate the proposed method, the calculation of cracking torque and ultimate torque of MEM-1 1 MEM-1 1n is Appendix.

The value of the torque to shear ratio significantly affects the behavior of the inverted T-shaped beams in terms of cracking pattern; failure mode; strut angle of inclination; cracking and ultimate torque; post-cracking torsional rigidity; cracking and ultimate shear; flange and web stirrup strain.

Moreover, a simple design equation to determine ultimate torque was proposed and tested, for predicting the torsional strength of RC beams with covers of HPFRC composite mortar.