A Gifford-McMahon cycle helium refrigerator with the ultimate temperature of 13 K at the 2nd stage was adopted, and a GdBa2Cu3O7−x bulk material of 60 mm diameter and 20 mm thickness reinforced by a stainless steel ring was located on a cold stage.
Ensure that you always keep the thermostat in the loop to control the ultimate temperature of the cabin.
The two were mixed to provide an ultimate temperature in the dialysate tank of 40°C.
This refrigerator reached an ultimate low temperature of 1.39 K with no applied heat load and provided 150 mW of cooling power at 1.65 K.
This paper presents an analytical model for determining the ultimate strength at elevated temperatures of stocky hot-rolled and plate girder webs subjected to patch loading induced by concentrated loads, as would occur in the compressive region of beam-to-column connections in a steel frame building in a fire.
The build-up of structure and viscoelastic properties with conversion during cure below the ultimate glass transition temperature of epoxy and acrylate resins has been investigated.
The stress build-up during isothermal cure below the ultimate glass transition temperature of epoxy and acrylate films is investigated in detail.
At temperatures of 120 °C, 150 °C and 200 °C, the ultimate displacement efficiency of super-heavy oil increased by 6.6%, 19.2% and 21.4%, respectively, compared to a temperature of 60 °C.
The results of proximate, ultimate analysis, calorific value, chemical composition of ashes, and ash fusion temperatures of all the fuel samples are shown in Table 1.
Planas et al. (1988) experimentally studied the mechanical properties of the steel strand under temperatures of 20 and − 165 °C that included yield strength, ultimate strength, and fracture strains.
BNNTs were randomly dispersed within a microcrystalline Al matrix under ribbon casting and led to more than doubling of room-temperature ultimate tensile strength of the composites compared to pure Al ribbons produced at the similar conditions.
