Sentence examples for ultimate stress level from inspiring English sources

In the FE analysis, connection moment is considered as the ultimate moment capacity when the first element of the top angle bolt or top angle of the FE model reaches at its ultimate stress level.

This ultimate condition is characterized by two parameters the ultimate axial strain and the corresponding stress level, which may or may not be the ultimate strength of the FRP-confined concrete.

The proposed model is based on the assumption that there is a fatigue-damaged zone ahead of the crack tip in which the local cyclic stress level approaches the ultimate tensile strength of the composite and the actual degradation process of the composite takes place.

Creep tests were run for 7 or 28 days with applied stress level at 30% of ultimate stress.

In water immersion, the ultimate strength deteriorates faster than the proof stress level leading to a decreasing damage tolerance of the vinyl-ester composite laminates.

The fatigue endurance limit (over one million cycles) for JFRP is achieved at a stress level of 65% of ultimate displacement.

In bond fatigue tests, debonding failure occurred for a maximum stress level corresponding to 60% of the ultimate bond load obtained from monotonic loading.

When the substructure has been assembled, post-tensioning strands are tensioned to a predetermined stress level to satisfy both service and ultimate limit state requirements for the totally prefabricated bridge substructure system (see Table 1).

After the column was assembled, post-tensioning strands were tensioned to a predetermined stress level to satisfy both service and ultimate limit state requirements for the bridge column (Kim et al. 2010).

Ultimate stress was calculated as the upper inflection point of the stress strain curve.

The fatigue test indicated that the fatigue resistance was degraded one stress level due to the water ingress, e.g. from 80% ultimate flexural strength (UFS) to 65% UFS.