Sentence examples for ultimate strength tests from inspiring English sources

Three experimental ultimate strength tests have been carried out on box girders under vertical bending moment and several effects have been detected due to corrosion.

The ultimate strength testing of space steel frame accounting for local buckling was performed.

It was found that curing at an elevated temperature had no effects on the joint ultimate strength tested at room temperature.

Observations of ultimate strength testing indicate that spandrel walls and fill contribute greatly to the strength and stiffness of these structures, and that loads approaching the plastic collapse load can often be obtained.

The results of the ultimate strength test of three box girders, that may represent the behaviour of a mid-ship section of a ship, deteriorated in a real corrosive seawater environment representing different levels of corrosion degradation of ageing ship structures, is used to evaluate the ultimate strength.

Samples were lyophilized before being coated twice with 5 nm thick OsO4 using an osmium plasma coater (Structure Probe, Inc .. Rectangular specimens were placed on Instron 5533 and tested with three 10% length preload cycle stretches before an ultimate strength test.

The reference stress σ0 is taken to be the average of yield and ultimate strength of testing orientation B, giving 915 MPa.

Parametric studies were carried out and the ultimate strengths from tested results and design codes were compared and discussed.

Vogel and Svecova (2012) took the initial stiffness till stress equals to 40%% of the ultimate strength of the tested cylinder.

It was also observed that average stresses in closed-type wire ropes crossing diagonal cracks at ultimate strength of beams tested were much higher than those in U-type wire ropes, showing better utilization in the former case.

Current design codes on aluminum alloy structures, such as the American aluminum design manual (AA), the European code (EC9), Chinese design specifications for aluminum structures (GB50429), the North American Specification for the design of cold-formed steel structural members (AISI) and the direct strength method (DSM), were used to calculate the ultimate strength of the tested columns.