Sentence examples for ultimate loads of the from inspiring English sources
This meant that repeated loading of about 0.6F ys had a minor effect on the ultimate loads of the specimens.
With increasing prestress levels, the cracking, yield, and ultimate loads of the beams increased.
The finite element model results closely agreed with the experimental results; the model overestimates the values of the ultimate loads of the tested slabs by 2 3%. 7.
The ultimate loads of the test beams proved to be different from the control beam, this difference is dependent upon the loading behavior.
From the experimental results, it is found that the ultimate loads of the stub columns decrease while the width-to-thickness ratios or the temperature increases.
The ultimate loads of the test specimens were compared with the design ultimate loads of these beams calculated using Rigid Plastic Analysis (RPA).
Percentage ratios of the diagonal shear cracking load to ultimate load of the NCC-50 and SCC-50 specimens were 39 and 41%% of the ultimate loads, respectively.
These figures show that at the ultimate load of the beam, the rotations at the left and right end corners are 0.036 and 0.031 radians, respectively.
The beams with X8 expanded steel mesh and lightweight brick core failed in shear at 82.4 % of the ultimate load of the control beam.
A numerical example for estimating the ultimate load of the steel scaffolding system is also described in the chapter.
The study showed that the ultimate load of the lipped channels under compression varied greatly with the perforation position.
