Sentence examples for ultimate load of the from inspiring English sources

A numerical example for estimating the ultimate load of the steel scaffolding system is also described in the chapter.

The study showed that the ultimate load of the lipped channels under compression varied greatly with the perforation position.

Based on the findings from the present experimental and numerical studies, a design formula for predicting the ultimate load of the CFDSCT column is proposed.

The ultimate load of the specimens increased almost linearly proportional to the gusset plate thickness and decreased with increasing plate size.

A slight decrease in the ultimate load of the specimens was observed when a 30° brace angle was used instead of a 45° one.

It was shown that an increase of thickness of the bamboo and GFRP layers could significantly increase the flexural stiffness and ultimate load of the sandwich beams.

With increasing prestress levels, the cracking, yield, and ultimate loads of the beams increased.

The ultimate loads of the test specimens were compared with the design ultimate loads of these beams calculated using Rigid Plastic Analysis (RPA).

Generally, it has been shown that the EC4 accurately predicted the ultimate loads of axially loaded concrete-filled stainless steel circular tubular columns, but were quite conservative for predicting the ultimate loads of the eccentrically loaded columns.

From the experimental results, it is found that the ultimate loads of the stub columns decrease while the width-to-thickness ratios or the temperature increases.

The ultimate loads of the three specimens were found to be evidently less than the concentrically loaded specimen which has been earlier reported.