Sentence examples for ultimate deflection of from inspiring English sources

On the other hand, the ultimate deflection of strengthened beams was less than ultimate deflection of un-strengthened beams.

As reinforcement ratio increases, the ultimate deflection of SFRC specimens becomes significantly greater than that of CC specimens.

The ultimate deflection of enhanced deck is comparable to deck tested without fasteners, but the initial stiffness of enhanced deck is much higher.

This paper discusses the effect of corrosion on the load-bearing capacity and ultimate deflection of corroded beams exposed to wetting drying cycles in a chloride environment under sustained loading without impressed current.

The ultimate deflection of the beams, however, decreased with increasing reinforcement corrosion, leading to a reduction in the ductility of the beams.

However, the ultimate deflections of the section increase because additional potential for plastic energy dissipation (PED) in the bending element.

They indicate that using HPFRCC materials, instead of normal concrete in RC frames, increased the ultimate load, ultimate deflection, ductility ratio, and plastic hinge characteristics of frames.

Load deflection behaviors were obtained and evaluated in terms of ultimate load, ultimate deflection, service stiffness, post-peak stiffness, and flexural toughness.

The variations in the 7-day flexural strength (fflx) and ultimate deflection (δult) in the span centres of the prism specimens printed at different paste ages are presented in Fig. 5(b) and (c), respectively.

Two load cells are located under each load and three deflection gauges are positioned at the midpoint for ultimate deflection and under each load to allow for computation of a deflection curve.

Test results indicate that the use of 0.75 vol% of steel fibers (instead of stirrups) leads to higher flexural strength but lower ultimate deflection and ductility.