Sentence examples for typical specification from inspiring English sources

Figure 6.7-1 illustypicaltypical specification tree at the top level for a space transport system during the time MIL-STD-490A was effective in military procurement.

Then a typical specification for TBP cost estimation is analyzed to identify the construction information that are required in TBP cost estimation and a typical specification for the requirement on design detail fulfillment is analyzed to identify the construction information that can be obtained from the design result.

The typical specification models earnings as a function of the standard human capital variables, schooling, and experience but additionally includes a quadratic in years since migration (Borjas 1999; Chiswick 1978).

The typical specifications for the minimum line width and channel length were 2 μm and 5 μm for photolithography and 25 μm and 20 μm for coarse printing techniques, respectively.

We will continue to the monitor the stability of these formulations with a view to establishing a two-year shelf life, a period over which predictions made by the ASAPprime® software indicated that the dissolution of the two drugs would be well within typical specifications (Q = 80%% at 20 min) for an immediate release product.

The result of the pressure calculation obtained with the Monte-Carlo method shows that a mean pressure rise per beam current at 1.9 × 10−10 Pa mA−1 after beam cleaning to a beam dose 100 A h is reasonable and within typical specifications of the synchrotron light source.

The chapter ends with a discussion of common measurement errors and typical sensor specifications.

The discussion begins with a derivation of typical ADC specifications for the receive path of a multi-carrier BTS system.

Representative available information about the parameters of the retaining wall problem is taken from literature, and typical practical specifications for the parameters are considered.

The dissolution changes at 20 min for both APIs over long term storage are of particular interest, as typical dissolution specifications for immediate release tablets are Q = 80%% at 20 min.

Equation 1 represents the typical standard linear specification of the diff-in-diff model.