Sentence examples for typical operating temperature from inspiring English sources
Typical operating temperature range is expected to be between 65K and 77K.
MCNPX code based on Monte Carlo method, is used to design a three dimensional model for BWR fuel assembly in typical operating temperature and pressure conditions.
MCNPX Computer code based on Mont Carlo Method, is used to design a three dimensional model for BWR fuel assembly in a typical operating temperature and pressure conditions.
The dark current is caused by Generation Recombination (G R) centres in the diode depletion region, and this leads to a typical operating temperature of ∼80 K in detectors with a planar implanted p n junction.
MCNPX (Monte Carlo N-Particle eXtend) computer code based on Mont Carlo method, is used to design two models for a BWR fuel bundle in a typical operating temperature and pressure conditions, the first is the oxide fuel bundle model and the second is the blanket seed (BS) bundle model.
The anode, meanwhile, is usually made of a good conductor such as iron, nickel, or carbon that does not readily emit electrons at typical operating temperatures.
Typical operating temperatures ranged from 700°C to 860°C, with an absolute pressure of 3.5 bars, reaching methane conversions over 80%.
To overcome this shortcoming, we have developed a method for the long term storage of pluripotent stem cells at the typical operating temperatures for standard laboratory deep freezers through use of a commonly available polysaccharide, Ficoll 70.
Hydraulic conductivities (permeability coefficients) of grouts when cast around high density polyethylene (HDPE) pipes to represent a heat exchanger were measured over a range of typical operating temperatures.
At typical operating temperatures (T ∼ 77 K), the dark current of GaSb/InAs SLS LWIR detectors is dominated by the Shockley Read–Hall (SRH) generation recombination (g r) process in the space-charge (depletion) region.
Using the developed correlations and proposed design method, the concentration of feed surfactant required to achieve 1 ppm dye concentration in the dilute phase is calculated for the two dyes at typical operating temperatures and feed dye concentrations.
