Sentence examples for typical dimension from inspiring English sources

Three typical dimension sets representative of the inhomogeneous size distributions are summarized in the table of Figure2.

First, on laser openings that were created with high laser energy input the thickness of the native oxide exceeds the typical dimension of 1 nm.

The gold nanoparticles aggregated in a dark flocky structure (typical dimension of approximately 1 ÷ 2 cm3) that remained suspended in the solution for long time.

Surprisingly, we show that crystallization appears to be preceded by a phase separation into Al-rich and solute-rich amorphous regions, having a typical dimension of 40 nm.

Since the micro-structured reactor is composed of pillars of typical dimension 5 × 100 μm, a special washcoat method has been developed leading to the controlled deposition of a homogeneous γ-alumina layer of thickness <1 μm.

The typical dimension of the individual nanostructure fabricated by OAD at room temperature is ranged from tens of nanometers to ~200 nm, as characterized by SEM images in Fig. 2, depending on the surface diffusivity of the depositing material.

The typical dimensions and parametric models are shown in Figure 1.

The provisions have been compared by analysing flat slabs with typical dimensions and reinforcement ratios.

QDs are semiconductor three-dimensional nanoparticles, with typical dimensions ranging from nanometers to tens of nanometers.

High-aspect-ratio fibrils are obtained with typical dimensions of order 1 mm by 1 μm.

Typical dimensions of the probe (from 2 × 2 mm to 7 × 7 mm) allow for measurements with sufficient spatial resolutions.