Sentence examples for typical cycling from inspiring English sources

Typical cycling conditions were 95°C for 8 min followed by 45 cycles of 95°C for 15 sec, annealing temp X (see Additional file 6 table 6) for 15 sec, 72°C for 20 sec; plate read after each cycle; melting curve 38-98°C 38-98°Ceread.5°C hold for 6 severy

A typical cycling profile consisted of 3 min denaturation at 94°C followed by 35 cycles of 94°C for 40 sec, 50°C for 50 sec, and extension at 72°C for 1 min. PCR products were sequenced for both strands using DYEnamic ET Terminator Sequencing Kit GE Healthh care Bio-Sciences AB, Sweden) according to manufacturer's instructions.

Cross sectional SEM images show very little change in the anode and cathode materials indicating that the material is stable under typical cycling conditions and at moderately elevated temperature (55 °C).

One can be described as an uneasy relationship between Armstrong and the typical cycling fan in continental Europe - at best there was a begrudging respect for the Texan's ruthless brilliance, at worst there was a bitter dislike of a conquering barbarian.

As a result, a better cycling performance can be obtained from the Co-doped WS2 electrode, as shown in Fig. 6a. Figure 6 Typical first and second charge/discharge curves of the Co-doped WS2 electrode (a), typical cycling performance of the precursor WS2 and the as-prepared Co-doped WS2 electrode (b) and coulombic efficiency versus cycle number of the raw and Co-doped WS2 (c).

Typical cycling conditions were 96°C 2 min 30 s, 94°C 30 s, 58°C 30 s, 72°C 1 min for 38 cycles.

37 Typical of cycling and soccer, athletes spend a large amount of time at low intensity during competition.

The typical thermal cycling profile was: 95°C for 60 seconds, 44°C for 60 seconds and 72°C for 90 seconds, for 40 cycles.

Normal cells interrupt typical cell cycling after exposure to ionizing radiation in order to allow for enough time for DNA repair, or in case of extreme or irreparable damage, prepare for cell death or senescence.

The typical thermal cycling profile for COI consisted of an initial denaturation period of 5 min at 95 °C followed by 30 cycles of 30 s at 95 °C, 1 min at 44 °C and 1 min at 72 °C and by a final extension step of 7 min at 72 °C.

Typical PCR cycling parameters included an initial denaturation step of 95°C for 5 min followed by 35 cycles of 94°C for 1 min, 58°C for 1.5 min, and 72°C for 1.5 min, plus a final extension step of 72°C for 1 hr.