Sentence examples for typical bend from inspiring English sources

Typical bend diameters needed for endoscopy applications, such as endourology are of the order of 15 cm [ 24].

As shown in Fig. 4, the fundamental mode shape of the gate structure is a typical bending mode of plates.

Free vibration analysis shows that the fundamental natural frequency of the gate structure is 1799 Hz whose corresponding mode shape is a typical bending mode of a plate.

Note here that induced axial compression loads in column sections affect their flexural strengths (typical bending moment-axial load (M N) interaction diagrams indicate this relationship).

To quantify the large-deflected deformation, a theoretical model is developed for the sheets with typical splay-bend and twist director distributions.

Analytical ratcheting limits of straight pipes subjected to typical reversed bending and steady internal pressure were deduced theoretically according to the Non-Cyclic Method.

For certain types of implants that are designed to fill very large segmental defects in appendicular bones, such as those used in limb sparing, compression testing does not provide the necessary insight into the complex loading states typical of bending.

This is a typical aspect of bending due to a fluctuation of stress rate, and if this fluctuation is ignored, the gradient of function does not change at this point.

In contrast, in a macroprobe of 20 μW mm−2 (typical of a bending magnet) the ODXAS observed from the thin patina and a bulk reference of CuCl are stable over time and identical [8].

Additionally, in order to evaluate mechanical performance of PU and the GO/PU composite under conditions of large-deflection bending typical for shoe soles, finite-element simulations with Abaqus/Standard were conducted.

Both these wavenumbers are attributed to C-O stretching and C-O bending typical of glycogen [ 27].