Sentence examples for type of curing from inspiring English sources
The nucleophilic attack on oxirane ring by amide nitrogen of nylon is dominant curing reaction in low DGEBA compositions, and another type of curing reaction with relatively large activation energy and frequency factor also occurred which becomes dominant when the DGEBA content reaches 63 wt% or more.
The wettability of the CNT yarn was affected by a type of curing agent.
Mechanical properties of the unidirectional composite were affected by the type of curing agent.
The results showed that the application of silica fume could increase compressive strength and reduce the permeability of alkali activated slag concrete and water curing was the most appropriate type of curing.
The data used in the multilayer feed forward neural networks models and input variables of genetic programming models have been arranged in a format of eight input parameters that cover the cement content, nanoparticle content, aggregate type, water content, the amount of superplasticizer, the type of curing medium, age of curing and number of testing try.
The viscosity of the uncured epoxy increased after the incorporation of HNTs, while the impact properties of the cured epoxy/HNTs nanocomposites were found to be highly dependent on the characteristics of base epoxy matrix, as determined by changing the type of curing agent.
The effect of five types of curing conditions on 28-day compressive strength was studied.
Effects of three types of curing on coconut shell aggregate concrete have been studied for long term performance.
They were cured either by covering with wet burlap or by applying two types of curing compounds, namely water-based and acrylic-based.
Up to an age of 90 days, the samples under all types of curing conditions showed improved response on the pulse velocity and subsequently an insignificant drop.
This paper presents an experimental study that investigated the influence of three types of curing methods during hot weather on the properties of hardened HSC reinforced with 0.0% or 0.22% (by volume fraction) polypropylene fibers (PFs).
