Sentence examples for type of coolant from inspiring English sources

The framework would give IAEA teams access to a key uranium mine and the site of a planned heavy water reactor, which uses a different type of coolant than regular water and produces a greater amount of plutonium byproduct than conventional reactors.

The effects of flowing liquid wall thickness and type of coolant on the neutronic performance of the reactor were investigated.

System design parameters such as thermal conductivity and fin efficiency, type of cells, type of coolant and operating conditions are factors which influence the performance of BIPVT.

MPT realized with using different coolants for alloying: (1) untreated; (2) carbon; (3) silicon; (4) nitrogen Table 3 Electrochemical characteristics of the steel 45 in 3 % aqueous solution of NaCl after MPT with different coolants Type of coolant Corrosion potential, −Е, mV Corrosion current density i cor · 104, А/сm2 Untreated 535 0.54 Carbon 470 0.50 Silicon 525 0.46 Nitrogen 512 0.38.

There are several circumstances that may influence the cooling efficacy: inaccurate technique for BT measurement, under-dosing of the cold infusion, re-warming of coolant during its administration, type of intravenous access, cooling responsiveness of the patient and the type of coolant [ 10].

In the present study five different system configurations with various types of fuel and different types of coolant have been taken into consideration.

In the event of turbulent flow with liquid types of coolant (water, fuel and oil), the effect of perforation cannot dominate the solid pin fin.

The new generation of reactors (III+ and IV) impose new challenges for radiation chemists due to their new conditions of operation and the usage of new types of coolant.

There is always been a lack of studies evaluating the heat transfer performance of perforated pin heat sink considering liquid types of coolants.

The proposed use of relatively new types of coolants, especially in combination with new fuel types and cladding materials, demands specific attention to the thermal hydraulics and core mechanics in normal and abnormal conditions.

The use of new types of coolants such as molten lead or lead bismuth eutectic alloy (LBE) represents another particular feature in the design concept of these reactors, since it permits one to take advantage of higher Heavy Liquid Metals (HLM) boiling temperature compared to water, leading to an improvement in thermal efficiency.