Sentence examples for type of borehole from inspiring English sources

The fracture spacing can be attained using results of any type of borehole images (regardless of the drilling mud system used).

For the same minimum inlet fluid temperature (0 °C), the minimum reduction of total areas required for borehole heat exchangers installation is still up to 21% when the type of borehole heat exchangers is changed from single U-pipe to double U-pipes.

The hydrogeological research revealed that the Na HCO3 water type of boreholes aligned along a fault and hosted in the confined aquifers display the higher fluoride content.

There are two common types of borehole fracture: first one is drilling induced tension fracture (DITF) and the second one, with 90° of difference, is called breakout.

Two types of borehole enlargements were created in a 14.5 m deep borehole, indicating the feasibility of the technology to improve the productivity of geothermal, oil and gas reservoirs.

The effects of both direction and rate of groundwater flow on the performance of various types of borehole heat exchanger (BHE) arrays are examined using a two-dimensional coupled heat conduction advection model.

An additional study of the combined effect of hydraulic fracturing and chemical stimulation showed that both types of borehole stimulation increase the permeability by approximately the same amount if dissolution can act directly on the fracture walls.

A landslide model experiment with two types of boreholes (inclined and vertical) was designed, and two laboratory model experiments were successfully conducted under the same soil conditions.

The data involved locations of the borehole (UTM), borehole discharge, depth of the borehole, type of aquifer, and chemical analysis of groundwater for major ions.

During the exploration phase of any oil and gas field, recognition of borehole type, its completion approach, and understanding of the future reservoir performance are directly interrelated to identification of the reservoir's rock types and flow units.

The main goal has been to determine same in-situ ground type of BHE, including the effect of borehole's depths (60 m: VB2; 90 m: VB3).