Sentence examples for two sets of specimens from inspiring English sources

Two different build strategies were employed; producing two sets of specimens.

This was attributed to different damage mechanisms for the two sets of specimens.

Stiffness-based stress-number of cycle (SN) curves were drawn for the two sets of specimens.

These two sets of specimens were subjected to the same compressive cyclic loading.

In addition, two sets of specimens were constructed with two different interlayers having significantly different mechanical properties.

The experiments were carried out on two sets of specimens with differing face sheet thickness which clearly indicated the important role played by core debonding in determining the peak load of the structure.

Nine sets of specimens with different configurations were tested with 0.5 kN/s incremental tensile load (Table 1).

Five sets of specimens were tested in tension-compression (R=-1; f=120Hot-Rolledolled (reference); SLM HIP machined; SLM HIP As-Built; EBmachinedchinEBM HIP HIP As-Built.

Four sets of specimens with different initial microstructures were used, i.e. annealed samples with grain sizes of D0=15 and 2.2 μm, and dynamically recrystallised ones with D0=3.5 and 1.5 μm.

Three sets of specimens were fabricated.

Tensile and flexural static tests as well as displacement-controlled bending fatigue tests (ratio of 0.10) were conducted on two sets of standard specimens, having fibre orientation parallel to the loading direction (cross-ply specimens) and at 45° to the loading direction (angle-ply specimens).