Sentence examples for two modes of failures from inspiring English sources

In this paper, two modes of failures under uniaxial monotonic compression and indirect tensile fatigue were employed for illustrating the procedures undertaken.

Hajeeh and Jabsheh (2009) analyzed a multi-component machining system having two modes of failure.

Two modes of failure were observed in the tests, depending on the loading arrangement and the position of the openings.

The part on ductile fracture encompasses the two modes of failure by void coalescence or plastic instability.

Two modes of failure were observed: puling out of the inner piece (6 of 15) and of the outer (peripheral) rim (9 of 15).

Both optimization and experimental results revealed that the shell displays optimum performance when two modes of failure coincide within the structure.

Tree pulling test and numerical modeling results showed that there were two modes of failure which occurred when a tree was overturned.

Two modes of failure were observed during the tests; the control slab had a cracks parallel to the support line and at the maximum negative moment region and experienced flexural failure.

The probability of failure (POF) for different categories of stope geometry, is calculated by considering two modes of failure; relaxation-related gravity driven (tensile) failure and rock mass brittle failure.

The results further show that transitions between these two modes of failure do occur and are governed by certain soil and implement factors, namely blade rake angle, soil strength and soil blade interface condition.

The competition between two modes of failure is studied: crack initiation along the weak joint which may constitute a privileged fracture surface and initiation in the homogeneous material at an optimum angle that minimizes the critical load to failure.