Sentence examples for turning condition from inspiring English sources
In dry turning condition, tool wear was mainly affected by cutting speed, increased with increasing cutting speed.
Consideration of the level line (1-delta) as per Fig. 2 which is a (tan Big ( frac{ 1-delta )pi }{2} Big ))—quasiline with an asymptotic angle (delta pi /2) with the imaginary axis at (infrac{ 1-deltae bounded turning condition (8) cannot hold in general with a constant (C_alpia < K), for a K-quasiline (alpha).
The functionally graded substrate/coating systems were designed for interrupted and finishing turning conditions.
It has a wide range of applications over many types of steels and turning conditions.
EE, AECM and PF achieved in the present study, there is an improvement of 61.776%, 57.025% and 7.49%, respectively compared to turning conditions in common use for rough turning.
In Dubai, Animal Kingdom triumphed on a synthetic surface, going a mile and a quarter, making left turns — conditions that he was used to from American racing.
At optimum turning conditions for each significant energy consumption response parameter viz.
Finally, the appropriate ranges for the optimal turning conditions were proposed for industrial production.
The results reveal that optimum turning conditions for the PF and EE are same and occur at 248.69 m/min.
A design scheme for solving the maximum principle boundary-value problem for arbitrary turning conditions and inertial characteristics of the spacecraft is given.
The results indicated that a cutting speed of 250 m/min, a feed rate of 0.05 mm/rev, and a depth of cut of 0.15 mm were the optimum CNC dry turning conditions.
